The Letna brushless motor driver (ESC) is specially configured for underwater thrusters. You can easily control your ROV thrusters with high precision and efficiency up to 30A current value. Its small and lightweight structure takes up very little space. With these features, it becomes a preferred choice for unmanned underwater vehicles.
It is directly compatible with the G-350 thrusters produced by our company. Additionally, it can also be used with other brushless motors.
You can use a terminal block product for power distribution to the ESCs. When using the product, it is essential to connect the power cables of the ESCs with a connector or solder them.
| Operating Voltage | 7-26V (2-6S) |
| Maximum Current | 40A |
| Weight | 9 g (including power and signal cables) |
| Dimensions | 35 x 17 mm |
| Signal Voltage | 3.3 - 5V |
| Stop Signal | 1500 microseconds |
| Maximum Forward Signal | 1900 microseconds |
| Maximum Reverse Signal | 1100 microseconds |
Connect the 3-pin motor output of the ESC to the brushless motor you are using. Connect the black data pin (GND) to the GND pin of your control board, and the white signal pin to the output of the control board where you will receive the signal. This signal output is for pins that can provide PWM output on Arduinos, while on Pixhawk it is the main out line. After these steps, connect your 30A ESC to power. The ESC is now ready for use…
Connection diagram with Arduino
Connection diagram with Pixhawk
1 x 40A Dual Direction ESC
Stokta yok
Special ESC with bidirectional operation capability for motors used in underwater vehicles
Bidirectional working capability ESC (Electronic Speed Controller) specially configured for brushless motors used in unmanned underwater vehicles.
