With M300 temperature and depth sensor, you can measure pressure volume with 2mm accuracy up to 300 meters deep. This allows you to accurately determine the depth underwater. In addition, temperature measurement with an accuracy of ±1°C can be performed. This product can be used in ROV and AUV as well as in various industrial applications requiring high pressure volume.
It is compatible with Arduino, Raspberry Pi, Pixhawk, and other controllers. In addition, M300 is directly compatible with ArduSub. The recommended operating voltage is 3.3V, but it can be powered up to 5V and communicates data via the I2C communication protocol.
| Libraries | MS5837 Arduino, MS5837 Python, MS5xxx ArduPilot |
|
| I2C Address | 0x76 | |
The aluminum body has been anodized by undergoing anodizing treatment to increase corrosion resistance. It has a 10 mm mounting diameter and is directly compatible with Lenta Waterproof Enclosure.
|
Operating Voltage |
3.3V - 5V |
|
Recommended Operating Voltage |
3.3V |
|
Operating Current |
1.5 mA |
|
Operating Pressure |
0-30 Bar |
|
Operating Depth |
300 meters |
|
Depth Resolution |
2 mm |
|
Air Temperature Measurement Range |
-20 to +85 |
|
Water Temperature Measurement Range |
2 to +40 |
|
Temperature Resolution |
±1°C |
|
Mounting Diameter |
10 mm |
M300 provides high precision depth and temperature information.
With the M300, you can easily measure underwater depth and temperature using I2C communication. Additionally, you can also measure pressure in various hydraulic environments.
